Hydronic Heating Boilers and Indirect Storage Tanks. Propane Boilers, Oil Boilers, Electric Boilers, Natural Gas Boilers and Wood Boilers! Hydronic Boilers are one of the most efficient way to heat when coupled with radiant floor heat. For information about each product please click on the model below:
Embassy Onex Condensing Boilers Electro Electric Boilers
Sime Planet Dewy 30 BFT Gas Boiler Biasi RivaPlus Gas Boilers
Sime Planet Dewy 30/50 BFT Biasi Oil Fired Boilers
Sime FORMAT.zip 35BF Boiler Biasi Gas Boilers B-10 NG
Prestige Solo Boilers Biasi Gas Boilers B-10 LP
Hydrotherm HWX Gas Boilers Prestige Excellence
Biasi Riva Gas Boilers Sime Planet Dewy 60 BFR Boiler
Ray 200i Gas Boilers Biasi Wood Hydronic Boilers
Firebird Condensing CI Oil Boilers Heat Transfer Versa Hydro
Hydrotherm HVX Series Gas Boilers
If you have any further questions please contact 866-432-8123. Thank you.
Thursday, September 25, 2014
Thursday, September 18, 2014
Substitute your heating between seasons with an electric space heater
Steibel-Eltron Electric Convection Heater - CNS 50 E - 231542 is a modern surface-mounted convection heater with a sleek European slimline design. CNS-E units are an effective, efficient replacement for traditional baseboard heaters, using significantly less room to accomplish the same heating task.
With its built-in thermostat, a single CNS 50 E is perfect as a stand-alone heating system in bathrooms or small rooms. Multiple CNS-E units can be placed strategically in larger spaces and their temperature settings adjusted individually for maximum comfort control. If used to replace an existing heater with a separate wall-mounted thermostat control, CNS-E heaters may be wired to use that control. Overheat protection is built into the unit.
CNS-E heaters work through natural convection, ensuring draft-free operation. Cool room air flows in the bottom of the unit, is warmed by the heating element, and rises silently out the top to heat the room. The CNS 50 E is designed with a frost protection setting. The lowest thermostat setting will maintain the room above freezing temperatures.
Like all of Stiebel Eltron's products the CNS 50 E series of heaters have an outstanding reliability record. Our three year limited parts warranty is a testament to the confidence we have in our products.
Econo Heater - Electric Panel Heaters offer out-of-the-way wall mounting and is an economic way of providing efficient electric room heating at a low cost. The new style has the on/off switch on the back right side of the unit to give our new Panel Heaters a sleeker look. Also, the panel heaters have rounded edges.
Using convection technology, heat is mainly generated behind the heater in the space between the panel and the wall, which leads to an efficient up-draft of heat circulated into the room. Econo heaters principle of convection means that about 90% of the heat comes from the back of the panel, while only 10% is radiated from the front of the panel. This form of electric "background" heating is not only very economic, but also safe and efficient.
Electrical Baseboard Heaters / Electric Baseboard Heaters in 120 Volt & 220/240 Volts. Use Electrical Space and Room Heaters by Qmark Marley. Available Electrical Baseboard installed on walls or Electrical Portable Baseboard Heaters. Your choice. Entire range of Electrical Voltage Thermostats too.
Myson Electric Towel Warmers / Electric Towel Heaters Economical and efficient, a Myson Electric towel warmer is a decorative source of heat that will add comfort to the room as well as keeping your towels warm and dry.
Throughout this section you’ll discover a variety of elegant and fashionable designer towel warmers in our European, Contemporary, Classic and Gem Collections, all coupled with advanced technology to provide efficient and environmentally friendly ways to deliver heat with function and style.
What Size Electric Heater do I need? Click here to see.
For all our Electric Products please click here.
Please call with questions at 866-432-8123
With its built-in thermostat, a single CNS 50 E is perfect as a stand-alone heating system in bathrooms or small rooms. Multiple CNS-E units can be placed strategically in larger spaces and their temperature settings adjusted individually for maximum comfort control. If used to replace an existing heater with a separate wall-mounted thermostat control, CNS-E heaters may be wired to use that control. Overheat protection is built into the unit.
CNS-E heaters work through natural convection, ensuring draft-free operation. Cool room air flows in the bottom of the unit, is warmed by the heating element, and rises silently out the top to heat the room. The CNS 50 E is designed with a frost protection setting. The lowest thermostat setting will maintain the room above freezing temperatures.
Like all of Stiebel Eltron's products the CNS 50 E series of heaters have an outstanding reliability record. Our three year limited parts warranty is a testament to the confidence we have in our products.
Econo Heater - Electric Panel Heaters offer out-of-the-way wall mounting and is an economic way of providing efficient electric room heating at a low cost. The new style has the on/off switch on the back right side of the unit to give our new Panel Heaters a sleeker look. Also, the panel heaters have rounded edges.
Using convection technology, heat is mainly generated behind the heater in the space between the panel and the wall, which leads to an efficient up-draft of heat circulated into the room. Econo heaters principle of convection means that about 90% of the heat comes from the back of the panel, while only 10% is radiated from the front of the panel. This form of electric "background" heating is not only very economic, but also safe and efficient.
Electrical Baseboard Heaters / Electric Baseboard Heaters in 120 Volt & 220/240 Volts. Use Electrical Space and Room Heaters by Qmark Marley. Available Electrical Baseboard installed on walls or Electrical Portable Baseboard Heaters. Your choice. Entire range of Electrical Voltage Thermostats too.
Myson Electric Towel Warmers / Electric Towel Heaters Economical and efficient, a Myson Electric towel warmer is a decorative source of heat that will add comfort to the room as well as keeping your towels warm and dry.
Throughout this section you’ll discover a variety of elegant and fashionable designer towel warmers in our European, Contemporary, Classic and Gem Collections, all coupled with advanced technology to provide efficient and environmentally friendly ways to deliver heat with function and style.
What Size Electric Heater do I need? Click here to see.
For all our Electric Products please click here.
Please call with questions at 866-432-8123
Thursday, September 11, 2014
How to Fill and Purge your Hydronic Heating Systems
A properly plumbed hydronic heating system makes it easy to add water and remove air, during the initial fill / purge and in later servicing.
We remove all of the air to make the hydronic heating system work mechanically correct. Small amounts of air can cause gurgling noises and large amounts of air can cavitate the circulators pumps causing the heating loop to stop flowing, resulting in a lack of heat.
When filling or purging a hydronic heating system, it is easiest when the system is broken down into smaller sections or loops. Each loop / zone is connected to the hydronic boiler fill valve and has the ability to be isolated from the other loops. Ball valves and drains isolate the system.
Water is introduced into the hydronic system in one way, flowing down the piping and out the boiler drain, carrying the air with it.
The process of isolating and filling is repeated until the hydronic system is full of water and the air removed.
Flushing the hydronic system works in reverse, replacing the old water with new.
Flushing the hydronic system is important. The hydronic heating system should be flushed to remove and flux or solder that may be mixed in the water.
This is only an example. Actual layouts vary from job to job.
For purge valves and heating supplies please click on the below link...
http://www.houseneeds.com/heating/hydronic-heat-supplies
We remove all of the air to make the hydronic heating system work mechanically correct. Small amounts of air can cause gurgling noises and large amounts of air can cavitate the circulators pumps causing the heating loop to stop flowing, resulting in a lack of heat.
When filling or purging a hydronic heating system, it is easiest when the system is broken down into smaller sections or loops. Each loop / zone is connected to the hydronic boiler fill valve and has the ability to be isolated from the other loops. Ball valves and drains isolate the system.
Water is introduced into the hydronic system in one way, flowing down the piping and out the boiler drain, carrying the air with it.
The process of isolating and filling is repeated until the hydronic system is full of water and the air removed.
Flushing the hydronic system works in reverse, replacing the old water with new.
Flushing the hydronic system is important. The hydronic heating system should be flushed to remove and flux or solder that may be mixed in the water.
This is only an example. Actual layouts vary from job to job.
For purge valves and heating supplies please click on the below link...
http://www.houseneeds.com/heating/hydronic-heat-supplies
Subscribe to:
Posts (Atom)