Decorative styling with finished top grill and side covers and Higher BTUH output per foot than fin-tube baseboards.
PDF Manual PDF Specs / Techs
Click here to view selection.
Myson CV Contractor Series Panel Baseboard with 1346 btu and dimensions of 7-7/8 by 24 inches - CV21-600.
The Myson CV21-600 Series Panel Radiator Baseboard replace standard baseboard but with better heat output along with radiant heat output.
The Myson CV21-600 radiator is equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z fit wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a preinstalled thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mounting stands are available.
The Myson CV21-600 heater Panel radiators put out about 80 to 85% radiant heat and 20 to 15% convection heat. The Myson CV21-600 radiator delivers quick, responsive, quiet and uniform heating with higher heat output of a typical hydronic baseboard per running foot.
Myson Heating Baseboard Radiators are manufactured using the latest laser technology to create a radiator heater of the highest quality construction. The Myson CV21-600 panel radiator mounts on the wall, off the floor, making the cleaning of floors and carpeting simple. Advanced welding techniques allow the convector plates to be welded directly to the water channel, providing quiet, gentle and responsive radiator heat. This panel heater is backed by Myson’s 5 Year Warranty, including leaks, external corrosion, flaking or peeling of the epoxy/ polyester enamel powder coat finish.
Please note: You can only put 2 Myson CV Baseboards in series (Max about 17,500 Btu) if you do this - you are not required to purchase on optional Vindo Head. If you pipe the baseboards with mono-flows - then you will want a Vindo Head to control the temperature. You can always buy this later.
