Thursday, February 4, 2016

new Myson radiator in the T6 IVC line

The Newest Myson panel radiators are the T6-22 IVC Radiators 

The Myson T6-22 IVC dual panel and double convector hydronic radiator offers the advantage of a standard 2 Inch central connection and the standard 4 corner connection options. Pre planning and installation dilemmas are greatly reduced, saving time and money. The new T design allows installers the flexibility to connect to the most convenient location for installation. Myson T6-22 IVC Series radiators are equipped with an internal valve control and an optional TRV head which enables you to match the heat output to the room requirements.
The Myson T6-22 is a ready to install radiator and includes a wall mounting bracket set, manual head (thermostatic head is optional) and insert, drain-off plug, air bleed vent and compression fittings for 1/2 Inch copper tubing. Innovative design, high quality workmanship and high heat output makes this hydronic radiator an excellent solution for heating any space.
Myson Baseboard Radiator Heaters are manufactured using the latest laser technology to create radiator heater of the highest quality construction, with a tough multi layered epoxy polyester powered coating paint finish second to none. These hydronic heating units have a size and column configuration to suit just about any room or space, regardless of size. In fact, the Myson Radiator T6-22 IVC Series Heaters are ideal for a variety of domestic or commercial uses.

Myson Radiator T6 IVC - 23-5/8 inches x 70-7/8 inches - 13940 BTU - T622-6-18 - Special OrderStandard Connections:
4 x internal thread G 1/2“ BSP side 4 corners
2 x external thread G 3/4” bottom center
Maximum positive operating pressure: 145 psi
Maximum operating temperature: 230° F
T6 IVC Depth: 4 1/8 inches and has double panel & two
rows of convector plates plus side panels & top grille
Standard Heights:
12, 20, & 24 inches (Nominal)
24 inch units are special order
Standard Lengths:
16 to 79 inches (Nominal)

Finishes:
1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F;
2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is baked at a temperature of 410° F.