Tuesday, October 28, 2014

Electro Industries Electric Plenum Duct Heaters

Since 1980, the Electro-Mate™ remains the leading product certified and approved for direct furnace plenum installation. At 40% to 60% the cost of a new gas furnace, any gas or oil furnace can very easily be converted to electric heating. As a dual heat conversion, the existing furnace remains the backup
or standby unit, also providing opportunity for easily switching between fuels.
 
The patented Electro-Mate® zero-clearance electric conversion system converts your existing natural gas, LP, or oil furnace into a “Dual-fuel” (electric/gas-oil) system.  Having this ability to use lower cost electric rates and by using the most cost effective heating source available can save you hundreds of dollars off of your heating bills each year.  To understand the true cost of energy for your heating system view the electric vs. gas/oil chart.  With electric’s 100% efficiency you will be able to get an idea of the cost savings available by using electric’s off-peak rates.
 
 All of the Electro-Mates come in up flow and down flow configurations, they simply insert into the plenum above or below your existing furnace.  All thermostat control wiring is simplified and handled within the Electro-Mate.  The Electro-Mate uses the existing blower to distribute the air throughout the home thus saving the need for new air handling equipment.
WarmFlo Select SL1 Series
This unit can be used in conjunction with a single stage heat pump, with one or two-stage air conditioning, or without air conditioning. This unit is compatible with single or multi-stage gas or oil furnaces with or without variable speed blowers. This unit includes automatic dual fuel control, with manual override switch. A conventional 4-wire thermostat must be used when installing with a heat pump.
WarmFlow Select SL2 Series
This unit is specifi cally designed to be used in conjunction with 2-stage heat pump systems. This unit is compatible with single or multi-stage gas or oil furnaces, with or without variable speed blowers. This unit includes dual fuel control, with manual override switch. This unit uses a conventional 4-wire thermostat and can be confi gured to be used in 1H/1C or 2H/ 2C mode. This unit will not work with a heat pump thermostat. This unit does not apply to 1 or 2-stage air conditioning, use WarmFlo Select SL1 Series.
* No chip code selection required
* Application selection dial – HP or non-HP
* All-inclusive controls, can be used with either heat pump or air conditioning
* Modulates electric elements to maintain precise output temperature
* Quiet operation with DC relays
* Energy control selector
* Simple 4-wire conventional thermostat wiring used for both heat pump and air conditioning systems
PDF Manual                   PDF Brochure                 PDF Specs / Techs
 
EZ-Mate Series
This unit can be used in conjunction with a single stage heat pump, with one or two-stage air conditioning, or without air conditioning. This unit is compatible with single or multi-stage gas or oil furnaces with or without variable speed blowers. This unit includes automatic dual fuel control, with manual override switch. A conventional 4-wire thermostat must be used when installing with a heat pump.
* Modulates electric elements
* Plenum and outdoor temperature sensing
* Automatic switchover
* Warm air comfort
* Heating capacity determined by outdoor temperature
* Setup dial selections - HP or non-HP
* No 2nd I/F “box” required
* No chip code selection required
* Designed for both single and variable speed blowers
* Mini Demand Control or Load Shed
PDF Manual                   PDF Specs / Techs            PDF Warranty
 
HeatChoice II Series
This unit is compatible to be used with single or multi-stage gas or oil furnaces, with or without variable speed blowers. This unit can be installed with or without air conditioning. The air conditioning can be either single stage or two stage. This unit includes dual fuel control, with manual override switch. This unit cannot be used with heat pumps.
* Energy control selector (dual fuel)
* Stat override timer (SOT) 90/180 minutes or disable
* All inclusive control
* Variable speed blower connection
* Automatic switch to backup during load control
PDF Brochure
 
To see an Energy Comparison Chart click here
 
 
 
 
 

3 comments:

  1. The patented Electro-Mate® zero-clearance electric conversion system converts your ... electricheatertimer.blogspot.com

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete

  3. Found your blog. It is full of really good information. Thank you for sharing. If you ever need service on air conditioner repair please visit us at rheemteamcomfort.com. We would love it if you would have a look at some of our blogs and let us know your thoughts.

    ReplyDelete