Single Walled Brazed Plate Heat Exchangers were developed years ago and they are now the most widely used device for isolating hydronic heating circuits. Single Walled Brazed Plate Heat Exchangers transfer heat from one liquid medium to another with no intermixing of the two fluids. Brazed Plate Heat Exchanger requires the fluid to be pumped into both sides of it at once. The brazed plate heat exchangers we sell can transfer up to 240,000 BTU’s per hour. The amount of heat transferred is dependent on the delta T (difference of temperature between the two fluids). It also depends on the amount of fluid moving through both sides of the heat exchanger. Brazed Flat Plate Heat Exchanger are required for all radiant heating systems where you mix heating water with domestic water.
Brazed Plate Heat Exchangers are produced with 10 to 50 flat plates, sizing is easy for your hydronic system or solar system. Well - not required everywhere. But, in most places it is and for places where you can mix heating and domestic water - you should never ever mix the two. Thus, use a Brazed Plate Heat Exchanger for all open loop heating systems!
Double Walled Brazed Plate Heat Exchangers transfers heat just like the single wall heat exchangers except with 2 walls. Required in some codes. Check with your local code to see if a double walled heat exchanger is required. Click here to see brochure.
OKO Brazed Plate Heat Exchangers are efficient, cost-effective solutions to your heating requirements. European-engineered and fabricated under a stringent quality program, these market-driven products provide consistent and reliable performance
Click here if Used for Domestic Hot Water
Click here if Used for Radiant Heating
Click here if Used for Wood Stoves
Click here if Used for Snow Melt Systems
Brazed Plate Exchangers, Shell & Tube and Heating Coil Heat Exchangers. Plate Heat Exchangers for Hydronic Heating. Shell and Tube Heat Exchangers for isolating Pools, Spas and other systems. Heat Coils used with Air Handlers and Forced Air Systems
Water to Air Heat Exchangers Hydronic Hot Water Boilers with or without Glycol. Use in existing Plenums and used for new and existing hot air furnaces.
PMP Paukner Air handlers are an excelent choice for converting hot water heat to forced hot air. Use your existing boiler to turn your house or specific areas into forced hot air
No comments:
Post a Comment