HeatLink Plumbing PEX Tubing

 

You can plumb your entire house with Heat-Link Plumbing PEX. The HeatLink Potable Water System features PureLink PEX-a tubing, the EasyFit manifold system. The unique HeatLink PEX-a process is based on a method developed during the 1970’s and uses organic peroxide to chemically cross-link the polyethylene during the manufacturing process. The PEX-a process produces a higher degree and greater uniformity in crosslinking, resulting product with significantly improved material properties with respect to temperature, pressure, strength and chemical resistance. Press sleeve technology has been used for decades worldwide in plumbing systems, and has also been used extensively for pneumatic and hydraulic applications.

HeatLink’s superior potable water system carries all necessary approvals for North American installations, and offers significant advantages and benefits in comparison to both copper and most common PEX plumbing systems in use today.

 

HeatLink EasyFit Plumbing PEX Manifolds

 

Heatlink EasyFit Plumbing PEX Manifolds - Example

Heatlink Easyfit Pex Manifolds come in 2 and 3 Port Tees and are sold with 1/2" PEX adapters. So just order the actual amount of ports you need and you should be good to go. There are several different End Connection you need to choose from as well as 3/4" Tee to allow you to send hot or cold water to a separte plumbing manifold in a different location. If you want to use this manifold with 3/8 Inch PEX tubing - buy our Coupler 1/2 by 3/8 inch for each branch you want to use with 3/8 Inch PEX.


Use silicone lubricant to lubricate dry o-rings to ensure a tight seal.
In case a leak develops during testing, remove pressure from system, clean the o-ring, and reapply silicon lube.
When placing the manifold into the supporting bracket, place the bottom snap-in lock in the bottom (braced) notch in bracket and then rotate it so that the top snaps into place.
In order to prevent stress on the manifold supply end connections, the supply piping must be braced or supported, parallel to the manifold and centred with the manifold’s inlets.  Please visit us at  Houseneeds.com to purchase products.

To order product please go to the below link...

http://www.houseneeds.com/plumbing-supplies/plumbing-pex-tubing-tools-accessories/heatlink-easyfit-pex-manifolds-1-2-inch-tube