Electro Warmflo Temperature Sensing Boiler with Dual Fuel

The Electro Electro-Boiler Midsize "MA, MO" Series is the most deluxe model that is designed for multiple temperature and zoning applications. This model has the ability to sense water temperature and maintain an accurate boiler temperature output by only energizing the electric elements for needed output (not full capacity). To learn more about this concept read WarmFlo. This model eliminates extra costs associated with relays, extra temperature controls, zone boxes, etc. Our more experienced installers use this boiler to avoid the extra cost of the above.

Our front panel temperature  knob allows you to simply dial in your desired output temperature and the TS will automatically adjust to meet your water temperature needs.  Available in 10-20 kW, single phase 240V.

Available Models:

240V single phase, w/ temperature setting dial, no outdoor reset

Model#	kW	Btu/h	Amps	Breakers
EB-MA-10	10	34,000	42	60
EB-MA-15	15	51,000	63	60,30
EB-MA-20	20	68,000	83	60,60

240V single phase, w/ temperature setting dial, outdoor reset

Model#	kW	Btu/h	Amps	Breakers
EB-MO-10	10	34,000	42	60
EB-MO-15	15	51,000	63	60,30
EB-MO-20	20	68,000	83	60,60

Other Benefits

• Built-in temperature/pressure gauge
• High Mass/Low Mass element modulation
• Boiler status panel
• ASME/CSA US/Canada certification
• Complete front panel accessibility
• Dual Boiler option
• Load Management connection
• Super quiet operation
• 20-year element/vessel warranty

 

Available Literature/
Specification Sheets

BL002	Radiant Applications
BL006	Electro-Boiler Literature
BL509	TS Series Midsize Specification Sheet

Electro-Boiler Warranty Statement

 

Electric Space Heaters and how to size one properly

During a cold weather spell you may need to subsidize your heating with an electric space heater. Do you have a drafty room or need to add heat just to help keep your pipes from freezing or have an area that does not have enough BTU's from you current heating system?  If so, do you know how to size a unit for your application?  The following information will help:

How to properly size an electric heater:

1) Measure the length and width of the room to determine total square footage.

2) Select your level of insulation

•Poor - Little insulation (Older homes) - 12.5 watts per foot

•Average - R-11 in walls and R-19 in ceiling - 10 watts per square foot

•Full - R-19 in walls and R-38 in ceiling - 7.5 watts per square foot

3) Make adjustments as necessary.

•For ceilings above 8 feet - increase wattage by 25% for every additional 2 feet in height

•Use a minimum of 1000 watts in a bathroom

•If a recommended wattage falls between two sizes - select the large heater

•For colder climates (prolonged winter temperatures below 20°F) use the next higher wattage up to 15 watts per square foot

4)  Use the chart below to calculate the recommended wattage or calculate it yourself with this example:
A room that is 10 feet wide by 13 feet wide with an 8 foot ceiling and Average insulations =  10 x 13 = 130 then 130 x 10 watts/per square foot = 1300 Watts

Room Size (Sq Ft with 8 foot ceiling)	Watts (Poor Insulation)	Watts (Avg Insulation)	Watts (Fully Insulation)
20 square feet	250	250	250
40 square feet	500	500	500
60 square feet	750	750	450
80 square feet	1000	1000	750
100 square feet	1250	1000	750
120 square feet	1500	1250	1000
140 square feet	1750	1500	1250
160 square feet	2000	1750	1250
180 square feet	2250	2000	1500
200 square feet	2500	2000	1500
220 square feet	2750	2250	1750
240 square feet	3000	2400	2000

Please Note: All these numbers are for general information - each install will vary depending on many other fact

To calculate the Watts to BTU click on the link below....

http://www.houseneeds.com/learning-center/electric-space-heater-install-information/watts-to-btu-calculator

 

For product information go to the below link to select the heater that will meet your needs.

 

http://www.houseneeds.com/heating/electric-space-heaters

 

Or call us at 866-432-8123 ask for sales

Electro Mini-Boiler WarmFlo H Series

This model is designed for multiple temperature and zoning applications. This model has the ability to sense water temperature and maintain an accurate boiler temperature output by only energizing the electric elements for needed output (not full capacity). To learn more about this concept read WarmFlo. This model eliminates extra costs associated with relays, extra temperature controls, zone boxes, etc. Our more experienced installers use this boiler to avoid the extra cost of the above components.

Models Available:

Model #	Volts	Watts	Amps	kW	Phase	Btu/h	CB
EMB-H-5	240	4,500	18.75	4.5	1-60	15,358	30A
EMB-H-7	240	7,000	29.17	7	1-60	23,891	45A
EMB-H-9	240	9,000	37.5	9	1-60	30,717	60A

BL308	Mini-Boiler Literature
BL006	Electro-Boiler Literature
BL001	Boiler Accessories
BL003	Radiant Floor Heating
BL306	Mini-Boiler Specification Sheet

Electro-Boiler Warranty Statement

Features include:

• Easy installation
• WarmFlo sensing technology
• Built-in pump control relay
• Pressure temperature gauge
• Built-in load management
• Wall-mounted design
• Two level hi-limit protection-160° pipe protection
• Quiet operation
• 20-year element/vessel warranty
• 100% efficient

 

Typical radiant applications include:

• Multi-zone applications
• Multi-temperature applications
• Hot water baseboard/radiator systems
• In-floor heat - staple-up application
• Forced air hot water coil
• Apartments
• Condo’s
• Garages
• Shops
• Animal Barns
• Whole house by using one boiler per level
• Even Bus Shelters....

Give us a call at 866-432-8123 if you have any questions or to place an order.